How to Charge a RAZ Vape
All RAZ disposable vapes including the RAZ DC25000 and RAZ TN9000 use USB-C charging. This guide covers exactly how to charge your RAZ vape, how long it takes, and what to do if it is not charging.
Charging Steps - RAZ DC25000
- 1
Get a USB-C cable
Use any standard USB-C cable. The RAZ DC25000 does not come with a cable - any phone charger cable works.
- 2
Locate the charging port
The USB-C port is on the bottom of the RAZ DC25000 device.
- 3
Connect and charge
Insert the USB-C cable and connect to a power source. The screen will activate and show a charging animation with battery percentage.
- 4
Wait for full charge
Leave connected for 45-90 minutes until the battery shows 100%.
- 5
Disconnect and vape
Unplug the USB-C cable when fully charged. Resume vaping normally.
RAZ DC25000 Battery and E-Liquid Display
The RAZ DC25000 has a clear digital screen showing two indicators:
- Battery indicator - shows remaining charge as a percentage (0-100%)
- E-liquid indicator - shows remaining e-liquid level
You will need to recharge the RAZ DC25000 battery approximately every 2-5 days depending on how heavily you vape. The e-liquid will outlast multiple battery charges before the device is fully depleted.
RAZ Vape Not Charging - Troubleshooting
No charging indicator on screen
Try a different USB-C cable. A faulty cable is the most common cause. Also try a different power adapter or USB port.
Screen is completely blank
The battery may be fully discharged. Leave connected for 5-10 minutes before the screen activates and shows the charging animation.
Battery charges but device does not vape
Check the e-liquid indicator. If it shows empty, the device is finished and needs to be replaced. The battery being full does not extend the device life if the e-liquid is gone.
Frequently Asked Questions
How do I charge my RAZ DC25000?
To charge your RAZ DC25000, connect a USB-C cable to the charging port on the bottom of the device. Plug the other end into any USB power adapter or computer. The battery indicator on the screen will show a charging animation. Charging takes approximately 45-90 minutes depending on how depleted the battery is.
How long does it take to charge a RAZ vape?
A RAZ DC25000 takes approximately 45-90 minutes to fully charge from a depleted battery. The device screen shows the current battery percentage during charging. Once it reaches 100%, charging is complete.
How do I know when my RAZ vape is fully charged?
The RAZ DC25000 has a digital display that shows the battery level as a percentage. When charging is complete, the battery indicator shows 100% and the charging animation stops. You can disconnect the USB-C cable at this point.
Why is my RAZ vape not charging?
If your RAZ vape is not charging, try: 1) Use a different USB-C cable - a faulty cable is the most common cause. 2) Try a different power adapter. 3) Check the USB-C port for debris. 4) Ensure the port is fully seated. If none of these work and the device shows no charging indicator, the battery may be fully discharged - wait 5-10 minutes connected before the screen activates.
How do I know when my RAZ DC25000 is empty?
The RAZ DC25000 shows both battery level and e-liquid level on its display. When the e-liquid indicator shows near 0%, the device is nearly depleted. The flavor will also become weaker or take on a slightly different taste as e-liquid runs low.
Shop RAZ Vapes at GetSmoke
RAZ DC25000 - 25,000 puffs, USB-C charging, digital display. Free shipping over $89. Adults 21+ only.
Shop RAZ DC25000