How to Use Geek Bar Pulse X
The Geek Bar Pulse X is a 25,000-puff rechargeable disposable vape with two distinct vaping modes: Regular and Pulse. This guide covers everything from first use to troubleshooting common issues.
Step-by-Step: First Use
- 1
Remove from packaging
Take the Geek Bar Pulse X out of its box and remove the silicone mouthpiece cover if present.
- 2
Check battery and e-liquid
The screen on the front shows battery level (icon on left) and e-liquid level (icon on right). Both should be full on a new device.
- 3
Choose your mode
Press the side button once to select Regular mode (steady vapor) or Pulse mode (burst firing for bigger hits and clouds).
- 4
Inhale to vape
Place the mouthpiece to your lips and inhale slowly and steadily. The device is draw-activated - no button needed to vape.
- 5
Charge when needed
Connect USB-C cable when the battery indicator shows low. Charge for 30-60 minutes before resuming use.
Regular Mode vs Pulse Mode
| Feature | Regular Mode | Pulse Mode |
|---|---|---|
| Vapor output | Moderate, consistent | High, burst-style |
| Flavor intensity | Smooth, all-day | Intense, bold |
| Battery drain | Slower | Faster |
| Best for | All-day vaping | Sessions, clouds |
How to Charge Geek Bar Pulse X
The Geek Bar Pulse X charges via USB-C. Use any standard USB-C cable:
- Connect USB-C cable to the port on the bottom of the device
- The screen will show a charging animation
- Full charge takes approximately 30-60 minutes
- The battery indicator returns to full when charging is complete
- Do not leave charging unattended for extended periods
Troubleshooting
Device is not producing vapor
Check battery level. If battery is full but no vapor, the e-liquid may be depleted. If both indicators show zero, the device is finished.
Device blinks 10-15 times and stops
This means the battery is depleted. Connect USB-C cable to recharge.
Flavor tastes burnt
The e-liquid is nearly depleted. Take shorter puffs or switch to a new device. Burnt taste with a full e-liquid indicator may mean the coil is damaged - stop using.
Frequently Asked Questions
How do you switch between Regular and Pulse mode on Geek Bar Pulse X?
To switch between Regular and Pulse mode on the Geek Bar Pulse X, press the button on the side of the device. One press switches modes. Regular mode is for normal vaping; Pulse mode fires the coil in rapid bursts for increased vapor production and a stronger hit. The display shows which mode is active.
How do I charge the Geek Bar Pulse X?
Charge the Geek Bar Pulse X using a USB-C cable connected to any USB power source. The device's screen shows the battery level. Charging typically takes 30-60 minutes. Do not use the device while it is charging.
How do I know when my Geek Bar Pulse X is empty?
The Geek Bar Pulse X has a digital display showing both battery level and e-liquid level. When the e-liquid indicator shows near zero, the device is almost empty. The vapor will also decrease in flavor intensity as the e-liquid depletes.
Why is my Geek Bar Pulse X not hitting?
If your Geek Bar Pulse X is not hitting, check: 1) Battery level - charge if low. 2) E-liquid level - if empty, the device is finished. 3) Draw technique - inhale slowly and steadily for 2-3 seconds. 4) If the device blinks repeatedly, the battery is dead or the device is depleted.
How many puffs does the Geek Bar Pulse X last in Pulse mode?
In Pulse mode, the Geek Bar Pulse X uses e-liquid faster due to higher power output. The device is rated for 25,000 puffs in Regular mode. Using primarily Pulse mode will reduce total puff count, though exact reduction depends on usage patterns.
Buy Geek Bar Pulse X at GetSmoke
25,000 puffs, Regular + Pulse mode, 40+ flavors. Free shipping over $89. Adults 21+ only.
Shop Geek Bar Pulse X